Standard operating procedures and precautions for laser cutting machines

May 02, 2025 Leave a message

I. Preparation before operation
‌Equipment inspection‌

Confirm that the power supply, cooling system (water cooler), and gas source (oxygen/nitrogen cylinder) are connected normally, and check whether the laser tube, reflector, and focusing mirror are clean and free of stains.
Ensure that the working environment is well ventilated, free of flammable and explosive items, and that the material surface is flat and firmly fixed.
‌Parameter setting‌

Adjust the laser power, cutting speed, focal length, and auxiliary gas pressure according to the material type (such as stainless steel, carbon steel, acrylic) and thickness. For example:
Carbon steel: Use a 1.0 nozzle for less than 6mm, a 1.5 nozzle for 8-12mm, and a 2.0 nozzle for more than 14mm.
Stainless steel: Use nitrogen perforation for less than 4mm (pressure 8-15 kg), and oxygen cutting is recommended for more than 5mm.
II. Operation steps
‌Power on and initialization‌

Start the stabilized power supply → water cooler → air compressor → CNC system → laser → gas valve in sequence, and perform the zero return operation after the system self-check is completed.
Check the water temperature (recommended ≤35℃) and water pressure (normal 5bar) of the chiller to ensure that the circulating water in the laser tube is pure water.
‌Loading and focusing‌

Import the design drawing (DXF/DWG format), adjust the focal length of the laser head to the surface of the material, and use the coaxial inspection program to ensure that the beam is centered.
‌Cutting execution‌

Start the cutting program and monitor the cutting status in real time. If slag or offset occurs, pause immediately and adjust the parameters.
3. Safety and maintenance points
‌Protective measures‌

Wear laser protective glasses during operation to avoid looking directly at the beam; the work area is equipped with fume exhaust equipment.
‌Daily maintenance‌

‌Lens cleaning‌: Use lens paper dipped in cleaning fluid to gently wipe the reflector and focusing lens every day to avoid damaging the coating.
‌Guide rail maintenance‌: Clean the guide rail with dry cotton cloth every half month and add lubricating oil (such as sewing machine oil).
‌Gas system‌: Air compressors and cold dryers need to be drained daily, once every 4 hours in summer.
‌Shutdown process‌

Turn off the laser high pressure → low pressure → water cooler → air valve → main power supply in sequence, and finally clean up the cutting waste.
‌Key tips‌: Different brands of equipment (such as Han's Laser) may require specific software operations (such as cncKad 11 module), and you need to refer to the manufacturer's manual to adjust the details.

Standard operating procedures and precautions for laser cutting machines
I. Preparation before operation
‌Equipment inspection‌

Confirm that the power supply, cooling system (water cooler), and gas source (oxygen/nitrogen cylinder) are connected normally, and check whether the laser tube, reflector, and focusing mirror are clean and free of stains.
Ensure that the working environment is well ventilated, free of flammable and explosive items, and that the material surface is flat and firmly fixed.
‌Parameter setting‌

Adjust the laser power, cutting speed, focal length, and auxiliary gas pressure according to the material type (such as stainless steel, carbon steel, acrylic) and thickness. For example:
Carbon steel: Use a 1.0 nozzle for less than 6mm, a 1.5 nozzle for 8-12mm, and a 2.0 nozzle for more than 14mm.
Stainless steel: Use nitrogen perforation for less than 4mm (pressure 8-15 kg), and oxygen cutting is recommended for more than 5mm.
II. Operation steps
‌Power on and initialization‌

Start the stabilized power supply → water cooler → air compressor → CNC system → laser → gas valve in sequence, and perform the zero return operation after the system self-check is completed.
Check the water temperature (recommended ≤35℃) and water pressure (normal 5bar) of the chiller to ensure that the circulating water in the laser tube is pure water.
‌Loading and focusing‌

Import the design drawing (DXF/DWG format), adjust the focal length of the laser head to the surface of the material, and use the coaxial inspection program to ensure that the beam is centered.
‌Cutting execution‌

Start the cutting program and monitor the cutting status in real time. If slag or offset occurs, pause immediately and adjust the parameters.
3. Safety and maintenance points
‌Protective measures‌

Wear laser protective glasses during operation to avoid looking directly at the beam; the work area is equipped with fume exhaust equipment.
‌Daily maintenance‌

‌Lens cleaning‌: Use lens paper dipped in cleaning fluid to gently wipe the reflector and focusing lens every day to avoid damaging the coating.
‌Guide rail maintenance‌: Clean the guide rail with dry cotton cloth every half month and add lubricating oil (such as sewing machine oil).
‌Gas system‌: Air compressors and cold dryers need to be drained daily, once every 4 hours in summer.
‌Shutdown process‌

Turn off the laser high pressure → low pressure → water cooler → air valve → main power supply in sequence, and finally clean up the cutting waste.
‌Key tips‌: Different brands of equipment (such as Han's Laser) may require specific software operations (such as cncKad 11 module), and you need to refer to the manufacturer's manual to adjust the details.