Laser marking machine uses laser beam to mark the surface of various materials permanently. The effect of marking is to expose the deep material through the evaporation of the surface material, so as to carve out exquisite patterns, trademarks and texts. Laser marking machines are mainly divided into CO2 laser marking machines, semiconductor laser marking machines, fiber laser marking machines and YAG laser marking machines. Laser marking machines are mainly used in some occasions that require more precision and higher precision. It is used in electronic components, integrated circuits (IC), electrical appliances, mobile communications, hardware products, tool accessories, precision instruments, glasses and clocks, jewelry, auto parts, plastic buttons, building materials, PVC pipes.
Composition structure of laser marking machine
Laser power supply
The laser power supply of the fiber laser marking machine is a device that provides power for the fiber laser, and its input voltage is AC220V alternating current. It is installed in the control box of the marking machine.
Fiber laser
The fiber laser marking machine uses imported pulsed fiber lasers, which have good output laser mode and long service life, and are designed to be installed in the casing of the marking machine.
Galvanometer scanning system
The galvanometer scanning system consists of two parts: an optical scanner and a servo control. The entire system is designed and manufactured using new technologies, new materials, new processes, and new working principles.
The optical scanner uses a servo motor with a moving magnetic deflection working mode. It has the advantages of large scanning angle, large peak torque, large load inertia, small electromechanical time constant, fast working speed, stability and reliability. The precision bearing anti-backlash mechanism provides ultra-low axial and radial runout errors; the "electronic torsion bar" replaces the traditional elastic material torsion bar, greatly improving the service life and long-term reliability; the zero-power holding working principle at any position not only reduces the power consumption, but also reduces the heating effect of the device, eliminating the need for a constant temperature device; the advanced high-stability precision position detection sensor technology provides high linearity, high resolution, high repeatability, and low drift performance.
The optical scanner is divided into an X-direction scanning system and a Y-direction scanning system, and a laser reflective lens is fixed on each servo motor shaft. Each servo motor is controlled by a digital signal sent by a computer to control its scanning trajectory.
Focusing system
The function of the focusing system is to focus the parallel laser beam on one point. Mainly adopt f-θ lens. Different f-θ lenses have different focal lengths, marking effects and ranges. The fiber laser marking machine uses imported high-performance focusing system. Its standard lens focal length is f=160mm, and the effective scanning range is Φ110mm. Users can select lens models according to their needs.
Optional F-θ lenses are:
f=100mm, effective focusing range Φ65mm.
f=160mm, effective focusing range Φ110mm.
Computer control system
The computer control system is the control and command center of the entire laser marking machine, and it is also the carrier of software installation. The workpiece marking process is completed through the coordinated control of the acousto-optic modulation system and the galvanometer scanning system.
The computer control system of the fiber laser marking machine mainly includes chassis, motherboard, CPU, hard disk, memory bar, D/A card, floppy drive, display, keyboard, mouse, etc.
Laser marking machine
May 28, 2025
Leave a message
