Common faults and solutions of laser cutting machines

Dec 19, 2024 Leave a message

Common Misunderstandings in Laser Cutting Machine Operation

Laser cutting machines play an important role in modern manufacturing. Their efficient and precise cutting capabilities make them widely used in metal processing, advertising production and other fields. However, due to the influence of factors such as equipment complexity and use environment, laser cutting machines may have some common faults during use. This article will introduce several common faults and their solutions to help users better maintain and use the equipment.

1. The laser cutting machine does not emit light or the light intensity is weakened

1. Cause of failure
- Optical path offset: The optical path system of the laser cutting machine consists of multiple reflectors and focusing lenses. If the position of these lenses is offset, the laser may not be able to emit normally.
- Capacitor failure: The capacitor is an important component in the laser cutting machine, which is used to store charge and stabilize current. If the capacitor is aged or damaged, the laser power will decrease.
- Laser failure: The laser is the core component of the laser. If there is a problem with the laser itself, it may also cause no light or weakened light intensity.

2. Solution
- Adjust the optical path: Regularly check and adjust the optical path system to ensure the accurate position of the reflector and focusing lens. If the lens is found to be stained or damaged, it should be cleaned or replaced in time.
- Replace the capacitor: If it is confirmed that the problem is caused by a capacitor failure, a new capacitor needs to be replaced. When choosing a capacitor, pay attention to the matching of specifications and capacity.
- Repair or replace the laser: If the laser fails, professional technicians may be required to repair or replace it.

2. The laser is intermittent during the cutting process

1. Cause of failure
- Poor water circulation: The laser cutting machine needs to use a water circulation system to cool the laser and optical lens during operation. If the water circulation is not smooth, it may cause the equipment to overheat, thereby affecting the stability of the laser.
- Circuit problem: The circuit system of the laser cutting machine is complex. If there is a problem in a certain link, it may cause unstable laser output.

2. Solution
- Clean the water circuit: Regularly check and clean the water tank, water pump and water pipe to ensure that the water circulation system is unobstructed. If there is a blockage, it should be cleaned in time.
- Check the circuit: If the fault is suspected to be caused by a circuit problem, you can check each circuit connection point one by one to ensure that it is not loose or damaged. If necessary, you can ask a professional technician to repair it.

3. Error in cutting size

1. Cause of failure
- Accuracy problem: The cutting accuracy of the laser cutting machine is affected by multiple factors such as the CNC system, motion control card, and servo motor. If the parameters of these components are not set accurately, it may cause errors in the cutting size.
- Graphic or programming errors: Before cutting, the CNC code needs to be generated through the programming software. If the graphic size is wrong or the programming parameters are not set properly, the cutting size will also be inconsistent.

2. Solution
- Calibrate the equipment: Calibrate the laser cutting machine regularly to ensure that all parameters are set accurately. The accuracy of the equipment can be verified by cutting the test board and adjusted according to the results.
- Check the graphics and programming: Before cutting, carefully check the graphic size and programming parameters to ensure that there are no errors. If problems are found, modify them in time.

4. The equipment cannot start or operate normally

1. Cause of failure
- Power supply problem: The laser cutting machine requires a stable power supply. If the power connection is poor or the voltage is unstable, the equipment may not start normally.
- Control system failure: Problems with the hardware or software of the CNC system may also cause the equipment to fail to operate normally.

2. Solution
- Check the power supply: Make sure the power supply is firmly connected and the voltage is stable. If you find a problem with the power supply, repair or replace it in time.
- Restart the control system: If the control system fails, you can try to restart the device. If the problem persists, you may need to maintain the control system or upgrade the software.

Conclusion

There are many common faults of laser cutting machines, but as long as you master the correct solution, you can effectively troubleshoot and restore the normal operation of the equipment. In daily use, regular maintenance of the equipment and timely detection and treatment of potential problems can greatly reduce the probability of failure and extend the service life of the equipment. I hope that the content introduced in this article can be helpful to the majority of users.