How To Use And Maintain Fiber Laser Cutting Machine Correctly?

When using a fiber laser cutting machine to process objects, you need to learn how to use and maintain the fiber laser cutting machine equipment in order to better utilize the equipment and maximize the efficiency of the equipment.
How to use and maintain the fiber laser cutting machine:
1) Check the steel belt frequently and make sure it is tightened. Otherwise, if something goes wrong during operation, people may be injured, or even fatal. The steel belt may seem like a small thing, but the problem is still serious.
2) Check the straightness of the track and the verticality of the machine every six months, and perform maintenance and debugging in time if any abnormalities are found. If you don't do this, the cutting effect may not be very good, the error will increase, and the cutting quality will be affected. This is a top priority and must be done.
3) Use a vacuum cleaner to suck out the dust and dirt in the machine once a week. All electrical cabinets should be closed tightly to prevent dust.
4) Each guide rail should be cleaned frequently to remove dust and other debris to ensure the normal operation of the equipment. The racks should be wiped frequently and lubricated to ensure lubrication and no debris. The guide rails must be cleaned and lubricated frequently, and the motor must also be cleaned and lubricated frequently. The machine will be able to move better and cut more accurately during travel, and the quality of the cut products will be improved. .
5) The bifocal laser cutting head is a vulnerable item on the laser cutting machine. Long-term use may cause damage to the laser cutting head.
Fiber laser cutting machines require regular inspection and maintenance. If there is deformation or other forms, you should know that the laser cutting head is somewhat damaged and needs to be replaced. Failure to replace will affect cutting quality and increase costs. Some products may require secondary processing, reducing production efficiency. The laser cutting head must be carefully inspected when it is received to avoid problems when it is used.