Product Description
I believe many people have heard of the 60W CO2 laser engraving machine, which is a very excellent laser equipment. This product has very advanced technology and efficient performance, bringing users a very convenient and high-quality experience.
This laser engraving machine uses a high-quality laser tube with a power of up to 60W, which enables it to quickly and accurately complete laser engraving tasks on various materials such as paper, wood, leather, plastic, etc. At the same time, it can not only perform engraving operations, but also cutting operations, allowing users to save time and cost while performing creative works.
Features
Compared with other thermal cutting methods, laser cutting has the characteristics of fast cutting speed and high quality. It is specifically summarized as follows:
Due to the small cutting spot, high energy density and fast cutting speed, high cutting quality can be obtained.
a. The cutting kerf is narrow, the two sides of the slit are parallel and perpendicular to the surface, and the dimensional accuracy of the cut piece can reach ±0.05mm.
b. The cutting surface is smooth and clean, the surface roughness is only tens of microns, and no mechanical processing is required, and the parts can be used directly.
c. After the material is laser cut, the width of the heat-affected zone is very small, the material properties near the slit are almost unaffected, and the workpiece deformation is small, the cutting accuracy is high, the geometry of the slit is good, and the cross-sectional shape of the slit is more regular rectangular.
2. High cutting efficiency
Due to the characteristics of the transmission, the laser cutting machine is generally equipped with multiple CNC workbenches, and the entire cutting process can be fully CNC controlled. During the operation, only the CNC program needs to be changed, and it can be applied to the cutting of parts of different shapes, both two-dimensional cutting and three-dimensional cutting.
3. Fast cutting speed
Using a 1200W laser to cut a 2mm thick low-carbon steel plate, the cutting speed can reach 600cm/min; cutting a 5mm thick polypropylene resin plate, the cutting speed can reach 1200cm/min. There is no need to clamp and fix the material during cutting, which can save both tooling and fixtures and auxiliary time for loading and unloading.
Application Scenarios








Factory Introduction

Workshop Production Process
Annealing
Stress Relief
Large Gantry
Finishin
Rough
Machining
Vibration
Aging
Welding
Machine Bed
Certificates










Shipping Process

Hot Tags: 60w co2 laser engraver, China 60w co2 laser engraver manufacturers, suppliers, factory, all around fibre laser cutting machine, cnc fiber laser cutting machine, entry level laser cutting machine, laser tube cutting and bending, small tube laser cutting machine, stainless steel fiber laser cutting machine






